Author:admin

The Wooden Toothpick Processing Machine used for making toothpick from wood.the final diameter and length toothpicks are 2.2 mm and 65mm. The standard of capacity is 500000 pcs/8 hours, and we can adjust the machines with customers’ requirements.
Introduction of Toothpick making machine:
(1) the above products in advance will log into standard dry square billet - shard - into silk - (poor color appropriate to bleaching, drying) length cut - polishing - remove the defect to sign - cutting cutting flower, remove the defect sign, packing, warehousing (factory).
(2) the above 8 units, production diameter 2.2, 65 mm long, a head of a hand-cut wooden toothpicks, 8 hours of production in 500000, machinery operators for 4 ~ 6, men and women there is no limit.Industrial electric power with 380 v, the normal production of the actual power consumption per hour around 12 degrees.Increase the GG - 641 machine 5, the output 3 million cigarettes.
(3) the mechanical, can use toothpick used.usually wood processing.
(5) usually each cubic meters of wood, it can produce diameter 2.2 x 65 mm specifications of the wooden toothpick by soaking wood hardwood of different material, 150 ~ 200 kg.
(6) the above 7 machine, our factory has applied for national patent.
Advantages of Toothpick making machine:
1.All production line need 4-6 workers.
2.The original machine used for making the product with diameter 2.2 mm and the length 65mm.The capacity is 500000 pcs/8 hours.We also can make the machine custom-made.Such as production pointed wooden toothpicks, both ends is to replace the above 7 machine with GG - 642 sharpening machine, 8 production 600000 sets / 8 hours.Increase the GG - 642 machine 4, the production of 3 million.
3.Need to preprocess the wood into 140/105/70/30cm length,6cm width and 3.5cm thickness firstly.
4.We are professional in this field.We also can send our engineer to help you install and adjust the processing line in your country.But the cost should be bear by the buyer.