Author:admin

Teak, mainly produced in Indonesia, Myanmar and Thailand. Teak prices are close to Redwood (Item, Wings, Huali), teak on the market is very small, mostly teak frame, or teak veneer furniture.

Teak itself prevent corrosion, wood can secrete oil, natural with a moth, moisture, anti-corrosion features. In ancient times, the South, many Southeast Asian dragon boat, boats are manufactured using teak, teak boat used buried in the mud, taken once a year, reaching antioxidant, hundreds of years can no distortion, no decay, Ming Zheng Western boats are made of teak wood, the deck of the Titanic also used teak production.

Teak straight stripes, stripes, showing the ink line.

In the teak are the advantages and disadvantages of expensive, complicated production, teak outdoor natural drying needs, most solid wood furniture is used in hot water treatment, such a process is not suitable for teak, teak will lose the internal fat. Also teak furniture also needs artificial oxidation, it presents golden yellow, otherwise teak color will deteriorate, dim. So the market is a lot of teak furniture is inappropriate to be processed through the destruction of teak were made. Further, since the Origin and class differences, teak furniture, great color.

-------------------------------------------------- -------------------------------------------------- ------------------------------------

Produced in different parts of black walnut slightly different, the following US production of black walnut Case (now mostly domestic black walnut they are from the United States, since the North American timber export restrictions is not).

Black walnut cutting surface is smooth, shiny and soft, pale dark brown purple ribbon, cut a beautiful large parabolic pattern, grainy compared to other wood, wood atmosphere beautiful (and American red oak that is similar, but the United States than red oak black walnut lot) cheaper.

Its sapwood is creamy white, heartwood from light brown to dark chocolate brown, occasionally with purple and dark stripes. Most now see the reason why black walnut very dark in color, it is the color of the steam treatment after only deepening.

As it's expensive, in addition to wood and wood color, there is a very important point is that it is very good fixity of nails, screws, strong adhesion, excellent energy absorption paint after painting, so the after the paint effect is very good, and resistant to corrosion.

But black walnut is not perfect, it dries very slowly, need our care, to avoid drying aging, all wood made possible cracking the case, largely because the drying process is not a good grasp of the plant, so now If it is not large domestic factories have good drying process the dried black walnut, basic cracking occurs, be careful nursing.

Xiaobian understand, black walnut is currently mainly used in domestic production of furniture and short cabinet and so on. But if cost-effective, unless the customer he is very fond of this black walnut wood or customer is ~~~~~~~~~~~~~~~~~ trench, usually from small series of my conscience speaking, is not recommended using this cost is relatively not so high timber.

If you do cabinets, recommended American red oak, cherry

If you do wardrobe, recommended American Red oak, white oak, elm, teak, etc.

If the children's room, recommended Pine

-------------------------------------------------- -------------------------------------------------- ------------------------------------

Cherry, the main origin of the eastern United States, suitable for high-end kitchen cabinets wardrobe panel, characterized by delicate texture, clear, after a good polishing effect, paint the surface of good results. The disadvantage is serious shrink when dry, the advantage is very stable after drying, easy transform.

-------------------------------------------------- -------------------------------------------------- ------------------------------------

White oak produced in the eastern United States, diverse species, of which about eight kinds of all commercial trees. There is a saying says "Red is not red oak, white oak is not white," which means white oak is not the same as the name of the color is white, but the wood is light colored and the heartwood is light brown to dark brown.

Advantages of white oak furniture as follows:

1. Mountain Line clear wood and the touch surface has a good texture.

2. The solid texture, firm, damp easily deformed, very resistant to wear, long service life.

3. The wood is good, its precious degree comparable with mahogany furniture.

4. White Oak by adding spray paint surface treatment, made of many different colors, textures and wood remains.

5. The white oak harmoniously combined with metal, glass, etc., can highlight its stylish feel.

 

White oak furniture Disadvantages:

1. white oak wood processing difficult.

2. The white oak rare materials are imported from abroad, the cost is high, white oak furniture prices are generally high.

3. The white oak furniture hard texture weight, high density, dehydration is difficult, it is easily deformed.

4. The white oak furniture is not high temperature. White Oak furniture surface temperature can not be placed higher than 40 degrees Celsius items, otherwise heat will damage its surface texture.

5. The white oak furniture because of its hard texture, easily damaged due to collision.

 

How to distinguish white oak furniture:

1. Whether fine wood clean, painted to look carefully not part of the clean look strong sense of presence or absence of oak unique;

2, wood grain is clear and beautiful. White oak wood, the sharper the higher the value. The rubber wood is not unique oak wood;

3. whether pure wood color. White oak furniture is best to choose "character type", wood and rubber wood color impure, and even mottled, black spots. If you encounter the kind of deep color (such as dark red, deep black, etc.) but labeled as "oak furniture", consumers pay special attention. Currently there are some furniture manufacturer, bought one price is very cheap oak hardwood posing from Hunan, Jiangxi and other places, such hardwood hard but not tough, long time will crack;

4. The wood is dry. Since the white oak hard texture heavy, moisture off the net more difficult. Some manufacturers eager to profit, that is not off the clean water produced furniture, over a year or so began to deform, require special attention;

 

5. Timber whether straight. Oak is easy to dehydration, "aliasing", then acting as inappropriate changed a curved furniture materials, but many manufacturers still use wood furniture such deformation.

-------------------------------------------------- -------------------------------------------------- ------------------------------------

Red oak, the origin of the eastern United States. Characteristic is hard and heavy wood, the disadvantage is slow drying, easy and Ash confusion, color, texture, will have a greater difference with the change of place of origin, especially wood and Ash similar to the difference between the red smooth place outside a small oak pattern texture, especially when using open paint production, no Ash red oak is also divided into two categories produced in the south and north of the eastern United States, southern red oak reddish color, there is color, suitable for processing a dark, reddish color northern oak, partial white, suitable for light treatment.

 

As shown, red oak pattern presentation Yamagata, nice texture, good texture, make furniture very significant level. Since the processing itself red rubber texture is very hard, very good processing performance, so the production of very fine furniture can do complex modeling and carving, suitable for production of European furniture. red oak furniture is good or bad depends largely on drying, since drying is slow, difficult to dehydration, dehydration if not handled well, it is easily deformed. in addition, the value of the red oak furniture itself is also reflected in the use of wood grain definition, texture more clearly, the higher the level of timber.

-------------------------------------------------- -------------------------------------------------- ------------------------------------

Ash, to the origin of timber processing in Russia and North America, Europe, painting, polishing performance is very good. Ash is highly resistant to decay resistance, and easily processed, are American luxury furniture, mainly wood, making furniture shape beautiful, very good gloss, wood is very clear. ash and the high strength, hardness, density mechanical endurance is very good, very suitable for making furniture.

One of the disadvantages of ash wood is all of the above common, timber dependent on imports, the price is very high. There are similar ash red oak, dry performance is poor, not well dried it will seriously affect the appearance and use, Ash the surface is easy to fluff, require higher production process.

-------------------------------------------------- -------------------------------------------------- ------------------------------------

Beech furniture Advantages:

1. In essence beech furniture, the beech hard material, impact.

2. easy to bend under steam, can create a variety of shapes, but after drying but not easily deformed, durable.

3. From the outside, beech wood uniform texture, texture, appearance, soft colors, smooth. For construction and timber objects.

Disadvantages:

1. Depending on the age of each tree, so the tree different color and density, thus making furniture out of the color will be different.

 

2. When the kiln drying and prone to cracks, deformation. Therefore, in order to make a success of a set of furniture is not easy.

-------------------------------------------------- -------------------------------------------------- ------------------------------------

Begonia Wood hard texture, texture, appearance and not easily broken, but not afraid of insects, Begonia wood furniture manufacturing is considered the finest materials, usually used for high-end furniture.

Begonia wood furniture Advantages:

1, Begonia wood wood furniture has a natural golden brown and shiny, which reflects the elegant furnishings Humanities temperament. No outdoors, you can get close to nature.

2, Begonia wood furniture with a unique mountain-wood, very beautiful and economic characteristics of the wood: the higher the value, the sharper the grain.

3, high crude Begonia Wood structure, moderate weight and strength of the position in the wood, but slightly higher hardness, shrinkage large.

4, Begonia wood furniture paint effects, polished and plastic viscosity can be better, also corrosion-resistant properties, not afraid of insects.

 

Begonia wood furniture Disadvantages:

 

Because Begonia wood wood belonging to relatively hard material, there is a drawback is generally not easy to dry, easy to crack, easy processing carving more difficult when playing a nail, which is both an advantage and disadvantage. However, it is not the biggest advantages is moth-eaten no solid wood furniture can be comparable.

-------------------------------------------------- -------------------------------------------------- ------------------------------------

Ash solid wood furniture is pretty good choice, than pine wood to hard wear, and much cheaper than with mahogany.

In addition, ash has a natural wood color, has a good overall strength properties, seismic force and steam bending strength, relatively high value. Pattern render ring appearance, neat and beautiful.

 

Ash furniture Disadvantages:

Ash heartwood resistance to corrosion is not very good, easy white wooden beetle that eats.

With the average hardwood timber, like Ash drying technology is not good if it will be easy to crack.

 

Further Ash shrinkage deformation larger, making all solid wood, it is recommended to use small pieces of wood mosaic.

-------------------------------------------------- -------------------------------------------------- ------------------------------------

Early maple furniture material is used in Europe and the Americas. Maple wood color very coordinated, good gloss, twilight relatively light, very beautiful. Maple furniture made clear texture, beautiful patterns. Processing performance maple, maple furniture firm firm, and durable, but also have cool features, is more upscale furniture.

 

But there are also some maple inevitable shortcomings. Maple section is not smooth enough, furniture made feel bad. Further maple Shrinkage is relatively large, it is easy to warp when dry.

 

American Maple wood is more commonly used as a timber. Processing performance is better. It nails, screws and glues good performance, easy dyeing, sanding and polishing to obtain excellent surface. However, the American Maple wood dries quickly, easily warped and distorted, shrinkage, prone to performance changes. In addition, Maple wood is heartwood free timber corrosion force levels, vulnerability to insect attack, heartwood has a moderate anti-corrosion treatment agent penetration, subjected to special treatment was better.

 

 

· Gaps grade timber and timber ships;

High-grade logs:

American Red Cherry (wood appearance, easy variant),

Ash (wood grain appearance, high hardness, high density, easy to change),

Red Oak (wood grain appearance, high hardness, high density, easy to change),

South American cherry wood (wood grain appearance, easy variant)

General Wood:

Walnut (stripes, clear wood, wood loose, easy variant),

American catalpa wood (wood grain appearance, wood loose, easy variations)

Finger-board:

Rubber wood (hard wood, no pattern, easy to change),

Camphor wood (wood loose, easy to change, more scarring), Pine (wood loose, scarring more)

Mainly high-grade wood hard wood, the same type, beautiful patterns, mostly imported, small holdings.

Do wardrobe cabinets before the election are generally lighter wood, easy to change, such as American red oak, cherry and so on.

and many more